Energy storage and batteries

UL 2596

UL 2596:2023, Test Method for Thermal and Mechanical Performance of Battery Enclosure Materials

UL 2596 exposes battery enclosure materials to two stresses representative of lithium-ion thermal runaway: the torch and grit (TaG) test, with a hot flame carrying abrasive particles, and the thermal runaway exposure test, with real cells going into thermal runaway inside a test box. We can carry out both; they are not currently within our accreditation.

Available, outside accreditation scope We can carry out the tests of UL 2596:2023 sections 5 and 6. They are not currently within our CNAS / CMA accreditation, and reports carry no accreditation mark.

What it tests

When a cell goes into thermal runaway, the pack enclosure faces two attacks: hot flame and particles ejected from the cell, and heat and pressure inside the pack. UL 2596 sets a test method for each, used to compare enclosure materials for electric vehicle and energy storage batteries — metals, composites, coatings, insulation layers and so on.

Section 5: torch and grit (TaG) test

  • Specimens 200 mm × 200 mm, at the thickness used in the product.
  • A methane-oxygen torch produces a nominal 3 kW flame, verified each test day at 1200 ± 50 °C.
  • The specimen surface is 60 mm from the torch outlet, and the flame carries abrasive particles, like the ejecta of a thermal runaway.

Section 6: thermal runaway exposure test

  • A fuel package of 25 lithium-ion 18650 cells (NCA cathode) inside a five-sided steel test box.
  • The specimen is sealed onto the open side as the sixth face; a side vent is sized for the target peak pressure.
  • All cells go into thermal runaway; box temperature, pressure and the specimen's unexposed-face temperature are recorded. Three specimens per material.

Testing at Huahui

We can carry out both the section 5 TaG test and the section 6 thermal runaway exposure test, with a dedicated TaG rig and test box, at our Shanghai main laboratory. They are not currently within our CNAS / CMA accreditation, and reports carry no accreditation mark.

For cabinets used to store batteries, see UL 1487; for battery thermal runaway testing, see battery thermal runaway testing.

Available, not accredited

StandardTest items
UL 2596:2023
Thermal and mechanical performance of battery enclosure materials
  • Section 5: torch and grit (TaG) test
  • Section 6: thermal runaway exposure test (fuel package in test box)

We can carry out these tests, but they are not currently within our CNAS / CMA accreditation, and reports carry no accreditation mark. If the results are for certification, check first that your certifier accepts them.

Frequently asked questions

Do UL 2596 results show that a battery pack is safe?

Not on their own. The standard says the material performance measured by these methods shall not be assumed to correlate with performance in the end-use application. It is a tool to compare and screen enclosure materials; the safety of a complete pack is evaluated under the relevant product standard.

Talk to an engineer

Tell us what you need to test

Describe the product, target market and standards. An engineer will get back to you shortly.