Fire-resistive coatings and protection materials

GB 14907

GB 14907-2018 Fire-resistive coatings for steel structures (《钢结构防火涂料》)

GB 14907 is the product standard for fire-resistive coatings for steel structures. It sets requirements for physical and chemical properties, durability, fire resistance and insulation efficiency. Fire resistance, insulation efficiency, bond strength, compressive strength and each of the durability properties are within our CNAS scope.

Within CNAS accreditation GB 14907-2018 clauses 6.4.4, 6.4.5, 6.4.9–6.4.17, 6.5 and Annex A are within our CNAS scope; several further items are within our CMA approval scope.

What GB 14907 tests

  • Fire resistance: a steel member coated with the fire-resistive coating is exposed in a furnace to the standard time–temperature curve; fire resistance is expressed as the time until the member reaches the failure criteria;
  • Insulation efficiency (Annex A);
  • Physical and chemical properties: condition in the container, drying time, crack resistance during initial drying, bond strength, compressive strength, dry density, pH;
  • Durability: resistance to water, hot–cold cycling, heat exposure, damp heat, freeze–thaw cycling, acid, alkali, salt spray corrosion and UV irradiation.

Some durability items use methods from other standards. For example, UV irradiation resistance uses the fluorescent UV lamp ageing method of GB/T 14522. These referenced methods are also within our accreditation scope.

Testing at Huahui

Tests run at our Shanghai main laboratory. Fire resistance is tested on the furnace, and the physical, chemical and durability properties in the same laboratory. For the insulation performance test commonly used on Shanghai projects, see DG/TJ 08-008.

For progress on the revision of the standard, see our articles Draft for comment of GB 14907, fire-resistive coatings for steel structures, published and Draft for approval of GB 14907, fire-resistive coatings for steel structures, published for comment.

Our accredited scope

AccreditationStandardTest items
CNAS GB 14907-2018
Fire-resistive coatings for steel structures
  • Bond strength (cl. 6.4.4)
  • Compressive strength (cl. 6.4.5)
  • Water resistance (cl. 6.4.9)
  • Resistance to hot–cold cycling (cl. 6.4.10)
  • Resistance to heat exposure (cl. 6.4.11)
  • Resistance to damp heat (cl. 6.4.12)
  • Resistance to freeze–thaw cycling (cl. 6.4.13)
  • Acid resistance (cl. 6.4.14)
  • Alkali resistance (cl. 6.4.15)
  • Salt spray corrosion resistance (cl. 6.4.16)
  • UV resistance (cl. 6.4.17)
  • Fire resistance (cl. 6.5)
  • Thermal insulation efficiency (Annex A)
CMA GB 14907-2018
Fire-resistive coatings for steel structures
  • Water resistance (cl. 6.4.9)
  • Resistance to hot–cold cycling (cl. 6.4.10)
  • Resistance to heat exposure (cl. 6.4.11)
  • Resistance to damp heat (cl. 6.4.12)
  • Resistance to freeze–thaw cycling (cl. 6.4.13)
  • Salt spray corrosion resistance (cl. 6.4.16)
  • UV resistance (cl. 6.4.17)
  • Fire resistance (cl. 6.5)
  • Thermal insulation efficiency (Annex A)
  • Condition in the container (cl. 6.4.1; No separate report for this item)
  • Drying time (cl. 6.4.2)
  • Crack resistance on initial drying (cl. 6.4.3)
  • Bond strength (cl. 6.4.4)
  • Compressive strength (cl. 6.4.5)
  • Dry density (cl. 6.4.6)
  • pH (cl. 6.4.8)
  • Acid resistance (cl. 6.4.14)
  • Alkali resistance (cl. 6.4.15)

From our CNAS accreditation scope and our CMA approval (China's mandatory approval for inspection and testing bodies, needed for reports used in mainland China), as of 2026-10. Items not listed are outside the scope; ask our engineers whether they can be tested.

Talk to an engineer

Tell us what you need to test

Describe the product, target market and standards. An engineer will get back to you shortly.