Chinese standards: fire doors, windows, shutters and glass

GB 14102

GB 14102.1-2024 Fire shutters — Part 1: General technical requirements (《防火卷帘 第1部分:通用技术条件》); also GB 14102-2005 Fire shutters (《防火卷帘》)

GB 14102 is the Chinese product standard for fire shutters. It sets requirements for materials, components, operation, smoke tightness and fire resistance. Fire resistance to GB 14102.1-2024 is within our CNAS scope, and most test items of the 2005 edition are within our CMA approval scope.

Within CNAS accreditation GB 14102.1-2024 clause 6.8 (fire resistance) is within our CNAS scope; further items of the 2005 and 2024 editions are within our CMA approval scope, where fire resistance testing does not include heat flux measurement.

What GB 14102 tests

Fire shutter testing covers:

  • Fire resistance: the shutter, together with its guide rails, roller and head, is exposed on the vertical furnace; the test method is GB/T 7633;
  • Wind pressure resistance (2024 edition);
  • Smoke tightness, temperature-controlled release and two-step closing;
  • Operation: running speed for powered opening and closing and for descent under self-weight, smoothness of running, noise;
  • Components and installation: material thickness, resistance to low and high temperatures, component dimensions, swing and lateral movement of the curtain slats, depth of engagement of the curtain in the guide rails, parallelism and verticality of the guide rails, and other items.

Testing at Huahui

Tests run at our Shanghai main laboratory. Fire resistance is tested on the vertical furnace. Fire resistance testing within our CMA scope (CMA is China's mandatory approval for inspection and testing bodies) does not include heat flux measurement. The clauses and limits for each item are in the scope table below.

Our accredited scope

AccreditationStandardTest items
CNAS GB 14102.1-2024
Fire shutters — Part 1: General technical requirements
  • Fire resistance (cl. 6.8)
CMA GB 14102.1-2024
Fire shutters — Part 1: General technical requirements
  • Wind load resistance (cl. 6.6)
  • Fire resistance (cl. 6.8; Excludes: heat flux)
CMA GB 14102-2005
Fire shutters — Part 1: General technical requirements
  • Appearance (cl. 7.1; No separate report for this item)
  • Material thickness; low- and high-temperature resistance (cl. 7.2.1, 7.2.2)
  • Component dimensional tolerances (cl. 7.3.1)
  • Slat swing and lateral play (cl. 7.3.2)
  • Curtain seam overlap (cl. 7.3.3)
  • Curtain engagement in guide rails, guide rail parallelism and verticality, gap between curtain and smoke seals (cl. 7.3.4)
  • Smoke seal gaps in the lintel (cl. 7.3.5)
  • Bottom bar parallel to the floor (cl. 7.3.6; No separate report for this item)
  • Roller shaft deflection and verticality (cl. 7.3.7)
  • Smoke control performance (cl. 7.4.2)
  • Smooth running (cl. 7.4.3; No separate report for this item)
  • Noise (cl. 7.4.4)
  • Speed of powered operation and gravity descent (cl. 7.4.5)
  • Two-stage closing (cl. 7.4.6; No separate report for this item)
  • Thermal release (cl. 7.4.7)

From our CNAS accreditation scope and our CMA approval (China's mandatory approval for inspection and testing bodies, needed for reports used in mainland China), as of 2026-10. Items not listed are outside the scope; ask our engineers whether they can be tested.

Talk to an engineer

Tell us what you need to test

Describe the product, target market and standards. An engineer will get back to you shortly.