In our last article we covered UN38.3 certification for lithium battery transport and explained that lithium battery products to be sold, and especially exported, must pass UN38.3 certification, a prerequisite for transporting lithium batteries.
Many manufacturers and logistics companies, however, mistakenly believe that once a lithium battery has a UN38.3 report, it can be shipped without further ado.
In fact, that is not entirely right. UN38.3 certification is a necessary condition for showing that a lithium battery meets basic safety standards in transport, but it is only one of many requirements for shipping batteries.
As dangerous goods, lithium batteries are usually classified as UN3480 (lithium batteries not in equipment) or UN3481 (lithium batteries in equipment), and fall under Class 9 of the UN dangerous goods transport classification.
Under this classification, transporting lithium batteries requires not only UN38.3 certification but also a range of other safety and compliance requirements to ensure safe, lawful transport: for example a transport identification certificate, an MSDS, a dangerous goods packaging certificate and a 1.2 m drop test report.
Let us look at each in turn.
UN38.3 test report
UN38.3 refers to Part III, Section 38.3 of the UN Manual of Tests and Criteria drawn up specifically for the transport of dangerous goods. It requires lithium batteries, before transport, to pass altitude simulation, thermal cycling, vibration, shock, external short circuit at 55 ℃, impact, overcharge and forced discharge tests to ensure their safety in transport.
For lithium batteries, a UN38.3 test report as specified in the UN Recommendations on the Transport of Dangerous Goods must be provided to prove that the battery meets the standards for safe transport.
1.2 m drop test report
Under the UN Recommendations on the Transport of Dangerous Goods, Model Regulations, when applying for an air or sea transport identification for lithium batteries, a 1.2 m drop test report may be required in addition to the UN38.3 report, depending on the case.
The 1.2 m drop test is usually done together with UN38.3 certification. If the lithium batteries are not installed in equipment, and each package contains more than 24 cells or 12 batteries, a 1.2 m free-drop test is required.
Why is a 1.2 m drop test needed?
The 1.2 m drop test simulates a package falling freely to the ground. It shows how the product is damaged and assesses what happens to the packaged product if it is accidentally dropped during transport, loading, unloading and handling. The packaging design can then be improved to suit the product and the standard, ensuring safe carriage and reducing hazards in transit.
Fires and explosions caused by drops and impacts during the transport of battery goods do occur from time to time. Battery packages must therefore withstand a drop from a height of 1.2 m, in the orientation most likely to cause maximum damage, onto a hard, non-resilient horizontal surface. After the test, the package passes if its top, bottom, long and short sides and corners are not ruptured, the batteries are not damaged, there has been no movement that would let the batteries contact one another, and none of the contents have leaked.
MSDS (Material Safety Data Sheet)
The MSDS (Material Safety Data Sheet), also translated as chemical safety data sheet, is a document that chemical manufacturers and importers use to set out the physical and chemical properties of a chemical (such as pH, flash point, flammability and reactivity) and the hazards it may pose to the user's health (such as carcinogenicity or teratogenicity).
Every dangerous good has a corresponding MSDS, which must bear the letterhead of the manufacturing plant. When booking export shipping, you must give the MSDS to the shipping line; it is the basis for booking dangerous goods. It is essential for transport staff, emergency responders and regulators when dealing with any emergency that may arise in transit.
Dangerous goods packaging certificate
This is a certificate showing that the packaging meets the requirements for transporting dangerous goods. "Dangerous goods packaging certificate" is a colloquial term; strictly speaking there are two documents. One is the performance certificate, in full the Inspection result sheet for the performance of packaging for entry-exit goods; the other is the use certificate, in full the Appraisal result sheet for the use of packaging for outbound dangerous goods. Only once you hold the packaging performance sheet can you go to the commodity inspection bureau, complete inspection and exchange it for the packaging use sheet; this use sheet is the dangerous goods packaging certificate.
The certificate confirms that the packaging meets the standards for transporting dangerous goods, ensuring that it prevents leakage, damage or unexpected reactions of the lithium batteries in transit. In air transport in particular, lithium battery packaging must meet strict standards.
Transport identification report
The transport identification report assesses the safety of transporting the goods, and gives recommendations, on the basis of Chinese and international regulations and standards for the transport of dangerous goods. It describes the hazardous nature of the product in detail, including its hazard class, division and packing group.
Besides the IATA Dangerous Goods Regulations (DGR) 2005, the GB standard Classification and code of dangerous goods and the Material Safety Data Sheet (MSDS), the transport identification report draws on the following standards and requirements: the International Maritime Dangerous Goods Code (IMDG Code), the List of dangerous goods for railway transport, the GB30000 series (rules for the classification and labelling of chemicals), the List of dangerous goods, and GB/T17519 (guidance on compiling safety data sheets for chemical products).
Without this document, carriers will not accept the batteries for transport.

First published on our WeChat channel: read the original